Toán học - Chapter 8: Advanced counting techniques

Advanced Counting Techniques Chapter 8With Question/Answer AnimationsCopyright © McGraw-Hill Education. All rights reserved. No reproduction or distribution without the prior written consent of McGraw-Hill Education.Chapter SummaryApplications of Recurrence RelationsSolving Linear Recurrence RelationsHomogeneous Recurrence RelationsNonhomogeneous Recurrence RelationsDivide-and-Conquer Algorithms and Recurrence RelationsGenerating FunctionsInclusion-ExclusionApplications of Inclusion-ExclusionApplications of Recurrence RelationsSection 8.1Section SummaryApplications of Recurrence RelationsFibonacci NumbersThe Tower of Hanoi Counting ProblemsAlgorithms and Recurrence Relations (not currently included in overheads)Recurrence Relations (recalling definitions from Chapter 2)Definition: A recurrence relation for the sequence {an} is an equation that expresses an in terms of one or more of the previous terms of the sequence, namely, a0, a1, , an-1, for all integers n with n ≥ n0, where n0 is a nonnegative integer. A sequence is called a solution of a recurrence relation if its terms satisfy the recurrence relation.The initial conditions for a sequence specify the terms that precede the first term where the recurrence relation takes effect. Rabbits and the Fiobonacci Numbers Example: A young pair of rabbits (one of each gender) is placed on an island. A pair of rabbits does not breed until they are 2 months old. After they are 2 months old, each pair of rabbits produces another pair each month. Find a recurrence relation for the number of pairs of rabbits on the island after n months, assuming that rabbits never die. This is the original problem considered by Leonardo Pisano (Fibonacci) in the thirteenth century.Rabbits and the Fiobonacci Numbers (cont.) Modeling the Population Growth of Rabbits on an IslandRabbits and the Fibonacci Numbers (cont.) Solution: Let fn be the the number of pairs of rabbits after n months.There are is f1 = 1 pairs of rabbits on the island at the end of the first month. We also have f2 = 1 because the pair does not breed during the first month.To find the number of pairs on the island after n months, add the number on the island after the previous month, fn-1, and the number of newborn pairs, which equals fn-2, because each newborn pair comes from a pair at least two months old.Consequently the sequence {fn } satisfies the recurrence relation fn = fn-1 + fn-2 for n ≥ 3 with the initial conditions f1 = 1 and f2 = 1. The number of pairs of rabbits on the island after n months is given by the nth Fibonacci number.The Tower of Hanoi In the late nineteenth century, the French mathematician Édouard Lucas invented a puzzle consisting of three pegs on a board with disks of different sizes. Initially all of the disks are on the first peg in order of size, with the largest on the bottom. Rules: You are allowed to move the disks one at a time from one peg to another as long as a larger disk is never placed on a smaller.Goal: Using allowable moves, end up with all the disks on the second peg in order of size with largest on the bottom.The Tower of Hanoi (continued) The Initial Position in the Tower of Hanoi PuzzleThe Tower of Hanoi (continued) Solution: Let {Hn} denote the number of moves needed to solve the Tower of Hanoi Puzzle with n disks. Set up a recurrence relation for the sequence {Hn}. Begin with n disks on peg 1. We can transfer the top n −1 disks, following the rules of the puzzle, to peg 3 using Hn−1 moves. First, we use 1 move to transfer the largest disk to the second peg. Then we transfer the n −1 disks from peg 3 to peg 2 using Hn−1 additional moves. This can not be done in fewer steps. Hence, Hn = 2Hn−1 + 1. The initial condition is H1= 1 since a single disk can be transferred from peg 1 to peg 2 in one move. The Tower of Hanoi (continued)We can use an iterative approach to solve this recurrence relation by repeatedly expressing Hn in terms of the previous terms of the sequence. Hn = 2Hn−1 + 1 = 2(2Hn−2 + 1) + 1 = 22 Hn−2 +2 + 1 = 22(2Hn−3 + 1) + 2 + 1 = 23 Hn−3 +22 + 2 + 1 ⋮ = 2n-1H1 + 2n−2 + 2n−3 + . + 2 + 1 = 2n−1 + 2n−2 + 2n−3 + . + 2 + 1 because H1= 1 = 2n − 1 using the formula for the sum of the terms of a geometric seriesThere was a myth created with the puzzle. Monks in a tower in Hanoi are transferring 64 gold disks from one peg to another following the rules of the puzzle. They move one disk each day. When the puzzle is finished, the world will end. Using this formula for the 64 gold disks of the myth, 264 −1 = 18,446, 744,073, 709,551,615 days are needed to solve the puzzle, which is more than 500 billion years.Reve’s puzzle (proposed in 1907 by Henry Dudeney) is similar but has 4 pegs. There is a well-known unsettled conjecture for the the minimum number of moves needed to solve this puzzle. (see Exercises 38-45)Counting Bit Strings Example 3: Find a recurrence relation and give initial conditions for the number of bit strings of length n without two consecutive 0s. How many such bit strings are there of length five? Solution: Let an denote the number of bit strings of length n without two consecutive 0s. To obtain a recurrence relation for {an } note that the number of bit strings of length n that do not have two consecutive 0s is the number of bit strings ending with a 0 plus the number of such bit strings ending with a 1. Now assume that n ≥ 3. The bit strings of length n ending with 1 without two consecutive 0s are the bit strings of length n −1 with no two consecutive 0s with a 1 at the end. Hence, there are an−1 such bit strings.The bit strings of length n ending with 0 without two consecutive 0s are the bit strings of length n −2 with no two consecutive 0s with 10 at the end. Hence, there are an−2 such bit strings. We conclude that an = an−1 + an−2 for n ≥ 3. Bit Strings (continued) The initial conditions are: a1 = 2, since both the bit strings 0 and 1 do not have consecutive 0s.a2 = 3, since the bit strings 01, 10, and 11 do not have consecutive 0s, while 00 does. To obtain a5 , we use the recurrence relation three times to find that: a3 = a2 + a1 = 3 + 2 = 5 a4 = a3 + a2 = 5+ 3 = 8 a5 = a4 + a3 = 8+ 5 = 13 Note that {an } satisfies the same recurrence relation as the Fibonacci sequence. Since a1 = f3 and a2 = f4 , we conclude that an = fn+2 . Counting the Ways to Parenthesize a Product Example: Find a recurrence relation for Cn , the number of ways to parenthesize the product of n + 1 numbers, x0 ∙ x1 ∙ x2 ∙ ⋯ ∙ xn, to specify the order of multiplication. For example, C3 = 5, since all the possible ways to parenthesize 4 numbers are ((x0 ∙ x1 )∙ x2 )∙ x3 , (x0 ∙ (x1 ∙ x2 ))∙ x3 , (x0 ∙ x1 )∙ (x2 ∙ x3 ), x0 ∙ (( x1 ∙ x2 ) ∙ x3 ), x0 ∙ ( x1 ∙ ( x2 ∙ x3 ))Solution: Note that however parentheses are inserted in x0 ∙ x1 ∙ x2 ∙ ⋯ ∙ xn, one “∙” operator remains outside all parentheses. This final operator appears between two of the n + 1 numbers, say xk and xk+1. Since there are Ck ways to insert parentheses in the product x0 ∙ x1 ∙ x2 ∙ ⋯ ∙ xk and Cn−k−1 ways to insert parentheses in the product xk+1 ∙ xk+2 ∙ ⋯ ∙ xn, we have The initial conditions are C0 = 1 and C1 = 1. The sequence {Cn } is the sequence of Catalan Numbers. This recurrence relation can be solved using the method of generating functions; see Exercise 41 in Section 8.4. Solving Linear Recurrence RelationsSection 8.2Section SummaryLinear Homogeneous Recurrence RelationsSolving Linear Homogeneous Recurrence Relations with Constant Coefficients. Solving Linear Nonhomogeneous Recurrence Relations with Constant Coefficients.Linear Homogeneous Recurrence Relations Definition: A linear homogeneous recurrence relation of degree k with constant coefficients is a recurrence relation of the form an = c1an−1 + c2an−2 + .. + ck an−k , where c1, c2, .,ck are real numbers, and ck ≠ 0 it is linear because the right-hand side is a sum of the previous terms of the sequence each multiplied by a function of n. it is homogeneous because no terms occur that are not multiples of the ajs. Each coefficient is a constant. the degree is k because an is expressed in terms of the previous k terms of the sequence. By strong induction, a sequence satisfying such a recurrence relation is uniquely determined by the recurrence relation and the k initial conditions a0 = C1, a0 = C1 , , ak−1 = Ck−1.Examples of Linear Homogeneous Recurrence Relations Pn = (1.11)Pn-1 linear homogeneous recurrence relation of degree one fn = fn-1 + fn-2 linear homogeneous recurrence relation of degree two not linearHn = 2Hn−1 + 1 not homogeneousBn = nBn−1 coefficients are not constants Solving Linear Homogeneous Recurrence RelationsThe basic approach is to look for solutions of the form an = rn, where r is a constant. Note that an = rn is a solution to the recurrence relation an = c1an−1 + c2an−2 + ⋯ + ck an−k if and only if rn = c1rn−1 + c2rn−2 + ⋯ + ck rn−k .Algebraic manipulation yields the characteristic equation: rk − c1rk−1 − c2rk−2 − ⋯ − ck−1r − ck = 0The sequence {an} with an = rn is a solution if and only if r is a solution to the characteristic equation. The solutions to the characteristic equation are called the characteristic roots of the recurrence relation. The roots are used to give an explicit formula for all the solutions of the recurrence relation. Solving Linear Homogeneous Recurrence Relations of Degree Two Theorem 1: Let c1 and c2 be real numbers. Suppose that r2 – c1r – c2 = 0 has two distinct roots r1 and r2. Then the sequence {an} is a solution to the recurrence relation an = c1an−1 + c2an−2 if and only if for n = 0,1,2, , where α1 and α2 are constants.Using Theorem 1 Example: What is the solution to the recurrence relation an = an−1 + 2an−2 with a0 = 2 and a1 = 7? Solution: The characteristic equation is r2 − r − 2 = 0. Its roots are r = 2 and r = −1 . Therefore, {an} is a solution to the recurrence relation if and only if an = α12n + α2(−1)n, for some constants α1 and α2. To find the constants α1 and α2, note that a0 = 2 = α1 + α2 and a1 = 7 = α12 + α2(−1). Solving these equations, we find that α1 = 3 and α2 = −1. Hence, the solution is the sequence {an} with an = 3∙2n − (−1)n. An Explicit Formula for the Fibonacci Numbers We can use Theorem 1 to find an explicit formula for the Fibonacci numbers. The sequence of Fibonacci numbers satisfies the recurrence relation fn = fn−1 + fn−2 with the initial conditions: f0 = 0 and f1 = 1. Solution: The roots of the characteristic equation r2 – r – 1 = 0 are Fibonacci Numbers (continued) Therefore by Theorem 1 for some constants α1 and α2. Using the initial conditions f0 = 0 and f1 = 1 , we have Solving, we obtain . Hence, .,The Solution when there is a Repeated Root Theorem 2: Let c1 and c2 be real numbers with c2 ≠ 0. Suppose that r2 – c1r – c2 = 0 has one repeated root r0. Then the sequence {an} is a solution to the recurrence relation an = c1an−1 + c2an−2 if and only if for n = 0,1,2, , where α1 and α2 are constants.Using Theorem 2 Example: What is the solution to the recurrence relation an = 6an−1 − 9an−2 with a0 = 1 and a1 = 6? Solution: The characteristic equation is r2 − 6r + 9 = 0. The only root is r = 3. Therefore, {an} is a solution to the recurrence relation if and only if an = α13n + α2n(3)n where α1 and α2 are constants. To find the constants α1 and α2, note that a0 = 1 = α1 and a1 = 6 = α1 ∙ 3 + α2 ∙3. Solving, we find that α1 = 1 and α2 = 1 . Hence, an = 3n + n3n . Solving Linear Homogeneous Recurrence Relations of Arbitrary Degree This theorem can be used to solve linear homogeneous recurrence relations with constant coefficients of any degree when the characteristic equation has distinct roots. Theorem 3: Let c1, c2 ,, ck be real numbers. Suppose that the characteristic equation rk – c1rk−1 –⋯ – ck = 0 has k distinct roots r1, r2, , rk. Then a sequence {an} is a solution of the recurrence relation an = c1an−1 + c2an−2 + .. + ck an−k if and only if for n = 0, 1, 2, , where α1, α2,, αk are constants. The General Case with Repeated Roots Allowed Theorem 4: Let c1, c2 ,, ck be real numbers. Suppose that the characteristic equation rk – c1rk−1 –⋯ – ck = 0 has t distinct roots r1, r2, , rt with multiplicities m1, m2, , mt, respectively so that mi ≥ 1 for i = 0, 1, 2, ,t and m1 + m2 + + mt = k. Then a sequence {an} is a solution of the recurrence relation an = c1an−1 + c2an−2 + .. + ck an−k if and only if for n = 0, 1, 2, , where αi,j are constants for 1≤ i ≤ t and 0≤ j ≤ mi−1. Linear Nonhomogeneous Recurrence Relations with Constant Coefficients Definition: A linear nonhomogeneous recurrence relation with constant coefficients is a recurrence relation of the form: an = c1an−1 + c2an−2 + .. + ck an−k + F(n) , where c1, c2, .,ck are real numbers, and F(n) is a function not identically zero depending only on n. The recurrence relation an = c1an−1 + c2an−2 + .. + ck an−k , is called the associated homogeneous recurrence relation.Linear Nonhomogeneous Recurrence Relations with Constant Coefficients (cont.) The following are linear nonhomogeneous recurrence relations with constant coefficients: an = an−1 + 2n , an = an−1 + an−2 + n2 + n + 1, an = 3an−1 + n3n , an = an−1 + an−2 + an−3 + n! where the following are the associated linear homogeneous recurrence relations, respectively: an = an−1 , an = an−1 + an−2, an = 3an−1 , an = an−1 + an−2 + an−3Solving Linear Nonhomogeneous Recurrence Relations with Constant Coefficients Theorem 5: If {an(p)} is a particular solution of the nonhomogeneous linear recurrence relation with constant coefficients an = c1an−1 + c2an−2 + ⋯ + ck an−k + F(n) , then every solution is of the form {an(p) + an(h)}, where {an(h)} is a solution of the associated homogeneous recurrence relation an = c1an−1 + c2an−2 + ⋯ + ck an−k .Solving Linear Nonhomogeneous Recurrence Relations with Constant Coefficients (continued) Example: Find all solutions of the recurrence relation an = 3an−1 + 2n. What is the solution with a1 = 3? Solution: The associated linear homogeneous equation is an = 3an−1. Its solutions are an(h) = α3n, where α is a constant. Because F(n)= 2n is a polynomial in n of degree one, to find a particular solution we might try a linear function in n, say pn = cn + d, where c and d are constants. Suppose that pn = cn + d is such a solution. Then an = 3an−1 + 2n becomes cn + d = 3(c(n− 1) + d)+ 2n. Simplifying yields (2 + 2c)n + (2d − 3c) = 0. It follows that cn + d is a solution if and only if 2 + 2c = 0 and 2d − 3c = 0. Therefore, cn + d is a solution if and only if c = − 1 and d = − 3/2. Consequently, an(p) = −n − 3/2 is a particular solution. By Theorem 5, all solutions are of the form an = an(p) + an(h) = −n − 3/2 + α3n, where α is a constant. To find the solution with a1 = 3, let n = 1 in the above formula for the general solution. Then 3 = −1 − 3/2 + 3 α, and α = 11/6. Hence, the solution is an = −n − 3/2 + (11/6)3n. Divide-and-Conquer Algorithms and Recurrence RelationsSection 8.3Section SummaryDivide-and-Conquer Algorithms and Recurrence RelationsExamplesBinary SearchMerge SortFast Multiplication of IntegersMaster TheoremClosest Pair of Points (not covered yet in these slides)Divide-and-Conquer Algorithmic Paradigm Definition: A divide-and-conquer algorithm works by first dividing a problem into one or more instances of the same problem of smaller size and then conquering the problem using the solutions of the smaller problems to find a solution of the original problem. Examples:Binary search, covered in Chapters 3 and 5: It works by comparing the element to be located to the middle element. The original list is then split into two lists and the search continues recursively in the appropriate sublist.Merge sort, covered in Chapter 5: A list is split into two approximately equal sized sublists, each recursively sorted by merge sort. Sorting is done by successively merging pairs of lists. Divide-and-Conquer Recurrence RelationsSuppose that a recursive algorithm divides a problem of size n into a subproblems.Assume each subproblem is of size n/b.Suppose g(n) extra operations are needed in the conquer step.Then f(n) represents the number of operations to solve a problem of size n satisisfies the following recurrence relation: f(n) = af(n/b) + g(n)This is called a divide-and-conquer recurrence relation.Example: Binary SearchBinary search reduces the search for an element in a sequence of size n to the search in a sequence of size n/2. Two comparisons are needed to implement this reduction;one to decide whether to search the upper or lower half of the sequence and the other to determine if the sequence has elements.Hence, if f(n) is the number of comparisons required to search for an element in a sequence of size n, then when n is even. f(n) = f(n/2) + 2Example: Merge SortThe merge sort algorithm splits a list of n (assuming n is even) items to be sorted into two lists with n/2 items. It uses fewer than n comparisons to merge the two sorted lists.Hence, the number of comparisons required to sort a sequence of size n, is no more than than M(n) where M(n) = 2M(n/2) + n.Example: Fast Multiplication of IntegersAn algorithm for the fast multiplication of two 2n-bit integers (assuming n is even) first splits each of the 2n-bit integers into two blocks, each of n bits.Suppose that a and b are integers with binary expansions of length 2n. Let a = (a2n−1a2n−2 a1a0)2 and b = (b2n−1b2n−2 b1b0)2 . Let a = 2nA1 + A0, b = 2nB1 + B0 , where A1 = (a2n−1 an+1an)2 , A0 = (an−1 a1a0)2 , B1 = (b2n−1 bn+1bn)2 , B0 = (bn−1 b1b0)2.The algorithm is based on the fact that ab can be rewritten as: ab = (22n + 2n)A1B1 +2n (A1−A0)(B0 − B1) +(2n + 1)A0B0.This identity shows that the multiplication of two 2n-bit integers can be carried out using three multiplications of n-bit integers, together with additions, subtractions, and shifts. Hence, if f(n) is the total number of operations needed to multiply two n-bit integers, then f(2n) = 3f(n) + Cn where Cn represents the total number of bit operations; the additions, subtractions and shifts that are a constant multiple of n-bit operations. Estimating the Size of Divide-and-Conquer Functions Theorem 1: Let f be an increasing function that satisfies the recurrence relation f(n) = af(n/b) + cnd whenever n is divisible by b, where a≥ 1, b is an integer greater than 1, and c is a positive real number. Then Furthermore, when n = bk and a ≠1, where k is a positive integer, where C1 = f(1) + c/(a−1) and C1 = −c/(a−1). Complexity of Binary Search Binary Search Example: Give a big-O estimate for the number of comparisons used by a binary search. Solution: Since the number of comparisons used by binary search is f(n) = f(n/2) + 2 where n is even, by Theorem 1, it follows that f(n) is O(log n). Estimating the Size of Divide-and-conquer Functions (continued) Theorem 2. Master Theorem: Let f be an increasing function that satisfies the recurrence relation f(n) = af(n/b) + cnd whenever n = bk, where k is a positive integer greater than 1, and c and d are real numbers with c positive and d nonnegative. Then Complexity of Merge Sort Merge Sort Example: Give a big-O estimate for the number of comparisons used by merge sort. Solution: Since the number of comparisons used by merge sort to sort a list of n elements is less than M(n) where M(n) = 2M(n/2) + n, by the master theorem M(n) is O(n log n). Complexity of Fast Integer Multiplication Algorithm Integer Multiplication Example: Give a big-O estimate for the number of bit operations used needed to multiply two n-bit integers using the fast multiplication algorithm. Solution: We have shown that f(n) = 3f(n/2) + Cn, when n is even, where f(n) is the number of bit operations needed to multiply two n-bit integers. Hence by the master theorem with a = 3, b = 2, c = C, and d = 0 (so that we have the case where a > bd), it follows that f(n) is O(nlog 3). Note that log 3 ≈ 1.6. Therefore the fast multiplication algorithm is a substantial improvement over the conventional algorithm that uses O(n2) bit operations. Generating FunctionsSection 8.4Section SummaryGenerating FunctionsCounting Problems and Generating FunctionsUseful Generating FunctionsSolving Recurrence Relations Using Generating Functions (not yet covered in the slides)Proving Identities Using Generating Functions (not yet covered in the slides)Generating Functions Definition: The generating function for the sequence a0, a1,, ak, of real numbers is the infinite series Examples:The sequence {ak} with ak = 3 has the generating function The sequence {ak} with ak = k + 1 has the generating function has the generating functionThe sequence {ak} with ak = 2k has the generating function has the generating functionGenerating Functions for Finite SequencesGenerating functions for finite sequences of real numbers can be defined by extending a finite sequence a0,a1, , an into an infinite sequence by setting an+1 = 0, an+2 = 0, and so on.The generating function G(x) of this infinite sequence {an} is a polynomial of degree n because no terms of the form ajxj with j > n occur, that is, G(x) = a0 + a1x + ⋯ + an xn.Generating Functions for Finite Sequences (continued) Example: What is the generating function for the sequence 1,1,1,1,1,1? Solution: The generating function of 1,1,1,1,1,1 is 1 + x + x2 + x3 + x4 + x5. By Theorem 1 of Section 2.4, we have (x6 − 1)/(x −1) = 1 + x + x2 + x3 + x4 + x5 when x ≠ 1. Consequently G(x) = (x6 − 1)/(x −1) is the generating function of the sequence. Useful Generating FunctionsCounting Problems and Generating Functions Example: Find the number of solutions of e1 + e2 + e3 = 17, where e1, e2, and e3 are nonnegative integers with 2 ≤ e1≤ 5, 3 ≤ e2 ≤ 6, and 4 ≤ e3 ≤ 7. Solution: The number of solutions is the coefficient of x17 in the expansion of (x2 + x3 + x4 + x5) (x3 + x4 + x5 + x6) (x4 + x5 + x6 + x7). This follows because a term equal to is obtained in the product by picking a term in the first sum xe1, a term in the second sum xe2, and a term in the third sum xe3, where e1 + e2 + e3 = 17. There are three solutions since the coefficient of x17 in the product is 3. Counting Problems and Generating Functions (continued) Example: Use generating functions to find the number of k-combinations of a set with n elements, i.e., C(n,k). Solution: Each of the n elements in the set contributes the term (1 + x) to the generating function Hence f(x) = (1 + x)n where f(x) is the generating function for {ak}, where ak represents the number of k-combinations of a set with n elements. By the binomial theorem, we have where Hence, Inclusion-ExclusionSection 8.5Section SummaryThe Principle of Inclusion-ExclusionExamplesPrinciple of Inclusion-ExclusionIn Section 2.2, we developed the following formula for the number of elements in the union of two finite sets:We will generalize this formula to finite sets of any size. Two Finite Sets Example: In a discrete mathematics class every student is a major in computer science or mathematics or both. The number of students having computer science as a major (possibly along with mathematics) is 25; the number of students having mathematics as a major (possibly along with computer science) is 13; and the number of students majoring in both computer science and mathematics is 8. How many students are in the class? Solution: |A∪B| = |A| + |B| −|A∩B| = 25 + 13 −8 = 30Three Finite SetsThree Finite Sets Continued Example: A total of 1232 students have taken a course in Spanish, 879 have taken a course in French, and 114 have taken a course in Russian. Further, 103 have taken courses in both Spanish and French, 23 have taken courses in both Spanish and Russian, and 14 have taken courses in both French and Russian. If 2092 students have taken a course in at least one of Spanish French and Russian, how many students have taken a course in all 3 languages. Solution: Let S be the set of students who have taken a course in Spanish, F the set of students who have taken a course in French, and R the set of students who have taken a course in Russian. Then, we have |S| = 1232, |F| = 879, |R| = 114, |S∩F| = 103, |S∩R| = 23, |F∩R| = 14, and |S∪F∪R| = 23. Using the equation |S∪F∪R| = |S|+ |F|+ |R| − |S∩F| − |S∩R| − |F∩R| + |S∩F∩R|, we obtain 2092 = 1232 + 879 + 114 −103 −23 −14 + |S∩F∩R|. Solving for |S∩F∩R| yields 7.Illustration of Three Finite Set ExampleThe Principle of Inclusion-Exclusion Theorem 1. The Principle of Inclusion-Exclusion: Let A1, A2, , An be finite sets. Then:The Principle of Inclusion-Exclusion (continued) Proof: An element in the union is counted exactly once in the right-hand side of the equation. Consider an element a that is a member of r of the sets A1,., An where 1≤ r ≤ n. It is counted C(r,1) times by Σ|Ai|It is counted C(r,2) times by Σ|Ai ⋂Aj|In general, it is counted C(r,m) times by the summation of m of the sets Ai.The Principle of Inclusion-Exclusion (cont)Thus the element is counted exactly C(r,1) − C(r,2) + C(r,3) − ⋯ + (−1)r+1 C(r,r) times by the right hand side of the equation.By Corollary 2 of Section 6.4, we have C(r,0) − C(r,1) + C(r,2) − ⋯ + (−1)r C(r,r) = 0.Hence, 1 = C(r,0) = C(r,1) − C(r,2) + ⋯ + (−1)r+1 C(r,r).Applications of Inclusion-ExclusionSection 8.6Section SummaryCounting Onto-FunctionsDerangementsThe Number of Onto Functions Example: How many onto functions are there from a set with six elements to a set with three elements? Solution: Suppose that the elements in the codomain are b1, b2, and b3. Let P1, P2, and P3 be the properties that b1, b2, and b3 are not in the range of the function, respectively. The function is onto if none of the properties P1, P2, and P3 hold. By the inclusion-exclusion principle the number of onto functions from a set with six elements to a set with three elements is N − [N(P1) + N(P2) + N(P3)] + [N(P1P2) + N(P1P3) + N(P2P3)] − N(P1P2P3)Here the total number of functions from a set with six elements to one with three elements is N = 36.The number of functions that do not have in the range is N(P1) = 26. Similarly, N(P2) = N(31) = 26 . Note that N(P1P2) = N(P1P3) = N(P2P3) = 1 and N(P1P2P3)= 0. Hence, the number of onto functions from a set with six elements to a set with three elements is: 36 − 3∙ 26 + 3 = 729 − 192 + 3 = 540The Number of Onto Functions (continued) Theorem 1: Let m and n be positive integers with m ≥ n. Then there are onto functions from a set with m elements to a set with n elements. Proof follows from the principle of inclusion-exclusion (see Exercise 27). Derangements Definition: A derangement is a permutation of objects that leaves no object in the original position. Example: The permutation of 21453 is a derangement of 12345 because no number is left in its original position. But 21543 is not a derangement of 12345, because 4 is in its original position. Derangements (continued) Theorem 2: The number of derangements of a set with n elements is Proof follows from the principle of inclusion-exclusion (see text).Derangements (continued) The Hatcheck Problem: A new employee checks the hats of n people at restaurant, forgetting to put claim check numbers on the hats. When customers return for their hats, the checker gives them back hats chosen at random from the remaining hats. What is the probability that no one receives the correct hat. Solution: The answer is the number of ways the hats can be arranged so that there is no hat in its original position divided by n!, the number of permutations of n hats. Remark: It can be shown that the probability of a derangement approaches 1/e as n grows without bound.