• Thiết kế flash - Cad viewing and coordinate system commandsThiết kế flash - Cad viewing and coordinate system commands

    Global coordinate system is called World Coordinate System (WCS) Defines a horizontal xy workplane Top (plan) view is default Local coordinate system is called User Coordinate System (UCS) User defined

    ppt12 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1256 | Lượt tải: 0

  • Bài giảng PhotoshopBài giảng Photoshop

    5, Bevel and Emboss Hiệu ứng chạm nổi và vát cạnh. Style: Outer Bevel: hiệu ứng cạnh xiên bên ngoài Inner Bevel: hiệu ứng cạnh xiên bên trong Emboss: hiệu ứng chạm nổi Pillow Emboss: hiệu ứng chạm nổi khắc xuống Stroke Emboss: chạm nổi cho đường viền (phải kiểm vào hiệu ứng Stroke mới thấy được kiểu này) Technique: Smooth: khối không sắc...

    doc69 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1161 | Lượt tải: 1

  • Thiết kế flash - TolerancingThiết kế flash - Tolerancing

    Do not repeat dimensions Dimension most descriptive view of feature being dimensioned Dimension between views Omit one intermediate dimension Smaller dimensions inside of larger dimensions Extension lines may cross object lines and other extension lines

    ppt16 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1140 | Lượt tải: 0

  • Thiết kế flash - DimensioningThiết kế flash - Dimensioning

    Full Half Offset Broken Out Revolved Removed Aligned Assembly

    ppt8 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1025 | Lượt tải: 0

  • Thiết kế flash - Section viewsThiết kế flash - Section views

    Measure, then transfer the vertex distances from the principal-principal reference line (H-F) in the adjacent view to the principal-auxiliary (F-1) reference line

    ppt20 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1526 | Lượt tải: 0

  • Thiết kế flash - Finding an auxiliary viewThiết kế flash - Finding an auxiliary view

    Views unfolded - auxiliary view shows true size and shape of inclined surface Distance from hinge to edge of inclined surface same for all views, principal or auxiliary Convention is to only show inclined surface in an auxiliary view

    ppt9 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 952 | Lượt tải: 0

  • Thiết kế flash - Auxiliary viewsThiết kế flash - Auxiliary views

    Surfaces maintain basic shape from one view to the next, accept when viewed on edge Useful for objects with inclined and oblique surfaces

    ppt10 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 1180 | Lượt tải: 0

  • Thiết kế flash - Visualization techniquesThiết kế flash - Visualization techniques

    Surfaces maintain basic shape from one view to the next, accept when viewed on edge Useful for objects with inclined and oblique surfaces Purdue Spatial Visualization Test: Rotations (PSVT:R) Mental Cutting Test (MCT) Mental Rotation Test (MRT)

    ppt13 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 947 | Lượt tải: 0

  • Thiết kế flash - Multiview projections 3Thiết kế flash - Multiview projections 3

    Fillet – inside rounding on a cast, forged or plastic part Round – outside rounding on a cast, forged or plastic part Typically 3 - 5 mm radius In multiview drawings, fillets/rounds only represented in views where you see curved shape

    ppt17 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 990 | Lượt tải: 0

  • Thiết kế flash - Multiview projections - 2Thiết kế flash - Multiview projections - 2

    A single-curved surface has curvature about a single axis Curvature only seen in one multiview Center lines used to indicate axis of curvature In isometric views, single-curved surfaces appear as ellipses

    ppt6 trang | Chia sẻ: huyhoang44 | Ngày: 18/03/2020 | Lượt xem: 919 | Lượt tải: 0