• Effective conductivity of isotropic composite with kapitza thermal resistanceEffective conductivity of isotropic composite with kapitza thermal resistance

    The paper presents the methods to compute the effective conductivity of composites with imperfect interfaces of Kapitza’s type. In this case, the temperature is discontinuous while the flux remaining continuous across the interface. First approach is based on the model of circle assemblage with thin coating. Second approach is based on the FFT s...

    pdf9 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 733 | Lượt tải: 0

  • Backone equation of state for cis-1,3,3,3-tetrafluoropropene (r1234ze(z))Backone equation of state for cis-1,3,3,3-tetrafluoropropene (r1234ze(z))

    Fig. 6. Deviation of liquid density data (ρl,cal) from the BACKONE EOS and experimental data (ρl,exp) of Higashi [8]. 5. CONCLUSION Equation of state for R1234ze(Z) was developed by using experimental data for vapor pressure and 0.4 280 300 320 340 360 380 T(K) Equation of state for R1234ze(Z) was developed by using experimental data for vap...

    pdf9 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 620 | Lượt tải: 0

  • Influence of the driving frequency and equivalent parameters on displacement amplitude of electrostatic linear comb actuatorInfluence of the driving frequency and equivalent parameters on displacement amplitude of electrostatic linear comb actuator

    Micro electromechanical system (MEMS) is an advance technology and widely applied in many fields like robotics, transportation, aerospace, medicine, or in electronic industry, etc. Micro actuators are one of the MEMS products and play an important role which generates a power to drive the micro devices as well as micro systems. Electrostatic Line...

    pdf10 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 731 | Lượt tải: 0

  • Effective boundary condition for the reflection of shear waves at the periodic rough boundary of an elastic bodyEffective boundary condition for the reflection of shear waves at the periodic rough boundary of an elastic body

    boundary conditions, being all equivalent up to the order of validity of the model. This has been done addressing boundary conditions, being all equivalent up to the order of validity of the model. This has been done addressing boundary conditions, being all equivalent up to the order of validity of the model. This has been done addr We have stu...

    pdf21 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 686 | Lượt tải: 0

  • Second order homogenization of quasi-Periodic structuresSecond order homogenization of quasi-Periodic structures

    In this paper, we developed a homogenization procedure based on the combination of asymptotic expansions and a variational approach in order to construct the higher order macroscopic energy of a quasi-periodic heterogeneous medium. The main assumption used in this approach to describe the quasi-periodicity is that the properties of a point in the...

    pdf24 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 670 | Lượt tải: 0

  • A generalisation to cohesive cracks evolution under effects of non-Uniform stress fieldA generalisation to cohesive cracks evolution under effects of non-Uniform stress field

    The present paper considers the problem of the nucleation and the propagation of a cohesive crack at the tip of a notch in two-dimensional elastic structures using Dugdale’s or Barenblatt’s cohesive force models where the stress field associated with a pure elastic response is assumed to be smooth and bounded, but nonuniform. Further it is suppo...

    pdf27 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 691 | Lượt tải: 0

  • Nghiên cứu ảnh hưởng của bơm điều chỉnh lưu lượng tự động linh hoạt theo tải trọng đến các thông số của hệ thống truyền động thủy lựcNghiên cứu ảnh hưởng của bơm điều chỉnh lưu lượng tự động linh hoạt theo tải trọng đến các thông số của hệ thống truyền động thủy lực

    Trong hệ thống truyền động thủy lực sử dụng bơm thủy lực có khả năng điều chỉnh lưu lượng tự động linh hoạt theo tải thì áp suất cài đặt của van LS ( ∆PLS ) là thông số quan trọng nhất, nó không những ảnh hưởng đến hiệu quả sử dụng năng lượng của hệ thống truyền động thủy lực nói riêng, của toàn bộ máy nói chung mà còn ảnh hưởng đến độ ổn địn...

    pdf3 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 1025 | Lượt tải: 0

  • Nghiên cứu chế tạo bộ kit thử kết hợp với máy đo quang cầm tay để định lượng nhanh nitrit và nitrat trong mẫu nước tại hiện trườngNghiên cứu chế tạo bộ kit thử kết hợp với máy đo quang cầm tay để định lượng nhanh nitrit và nitrat trong mẫu nước tại hiện trường

    Dựa trên các phương pháp trắc quang tiêu chuẩn xác định nitrit và nitrat, nghiên cứu này đã chế tạo thành công hai bộ kit thử dạng bột hoàn toàn kết hợp với máy đo quang cầm tay DPM – MT của hãng Kyoritsu water analysis, Nhật Bản để ứng dụng phân tích nhanh lượng vết nitrit và nitrat tại hiện trường. Các đánh giá đặc tính kit thử và chứng ...

    pdf10 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 781 | Lượt tải: 0

  • Inverse dynamic analyzing of flexible link manipulators with translational and rotational jointsInverse dynamic analyzing of flexible link manipulators with translational and rotational joints

    Nonlinear dynamic modeling and equations of motion of flexible manipulators with translational and rotational joints are built by using finite element method and Lagrange approach. Model is developed based on single link manipulator with only rotational joint. Inverse dynamic problem of flexible link manipulator is surveyed with an algorithm...

    pdf9 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 734 | Lượt tải: 0

  • Forming limit curve determination of AA6061-T6 aluminum alloy sheetForming limit curve determination of AA6061-T6 aluminum alloy sheet

    Đường cong giới hạn gia công được sử dụng trong phân tích gia công kim loại dạng tấm nhằm xác định các giá trị ứng suất hoặc biến dạng tới hạn mà tại các giá trị tới hạn này vật liệu sẽ bị hư hòng khi chịu biến dạng dẻo, ví dụ như quá trình dập kim loại. Bài báo này nhằm dự đoán giới hạn gia công của tấm hợp kim nhôm AA6061-T6 dựa trên mô hìn...

    pdf10 trang | Chia sẻ: huongthu9 | Ngày: 11/08/2021 | Lượt xem: 717 | Lượt tải: 0