• Đăng ký
  • Đăng nhập
  • Trợ giúp

Thư viện tài liệu, ebook tham khảo dành cho học sinh, sinh viên

Thư viện tài liệu trực tuyến miễn phí dành cho các bạn học sinh, sinh viên

Tai lieu
  • Trang Chủ
  • Tài Liệu
  • Upload
Tài liệu
  • Các Môn Đại Cương
  • Kỹ Thuật - Công Nghệ
  • Khối Ngành Kinh Tế
  • Khối Ngành Xã Hội
  • Công Nghệ Thông Tin
  • Ngoại Ngữ
  • Đồ Án - Luận Văn
  • Giáo Dục - Đào Tạo
  • Mẫu Văn Bản
  • Kỹ Năng Mềm
  • Văn Bản Luật
  • Giải Trí
  • Sức Khỏe
  • Ẩm Thực
  • Khoa Học Tự Nhiên
  • Chưa Phân Loại
  • Mới nhất
  • Xem nhiều
  • Tải nhiều
  • Experimental cultivation of spirulina platensis using my an mineral water, Thua Thien Hue provinceExperimental cultivation of spirulina platensis using my an mineral water, Thua Thien Hue province

    My An mineral water was suitable for the growth of Spirulina platensis after removing H2S. Productivity of Spirulina platensis cultivated in My An mineral water was about 10 g/m2.day. Spirulina platensis biomass had good quality with high amount of crude protein and fatty acids, reaching 68.32 % and 7.32 %, respectively. In addition, the amount ...

    pdf9 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 777 | Lượt tải: 0

  • The effects of silver nanoparticles on growth of chrysanthemum morifolium ramat. cv. The effects of silver nanoparticles on growth of chrysanthemum morifolium ramat. cv. "jimba" in different cultural systems

    Silver nanoparticles are suitable for in vitro Chrysanthemum growth in various culture systems: in vitro solid medium, in vitro liquid medium and microponic system are 1.5; 1.5; 5 ppm, respectively. Different culture systems have different SNPs absorbability which directly proportional to the culture time and inversely proportional to the SNPs c...

    pdf12 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 621 | Lượt tải: 0

  • Influence of synthesis factors on properties of geopolymers based on red mud and rice husk ash - Tran Ngoc TuyenInfluence of synthesis factors on properties of geopolymers based on red mud and rice husk ash - Tran Ngoc Tuyen

    Geopolymers was successfully synthesized from RM and RHA under the most appropriate conditions that were: (i) initial material compositions were RM, RHA and NaOH with SiO2/Al2O3 molar ratio of 4 and Na2O/Al2O3 molar ratio of 2.0; (ii) curing temperature of 100oC; (iii) curing time of 24 hours. The physico-mechanical properties including compress...

    pdf14 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 674 | Lượt tải: 0

  • Effect of some effective parameters on cod removal from Nam Son landfill leachate by electrocoagulationEffect of some effective parameters on cod removal from Nam Son landfill leachate by electrocoagulation

    The study indicated several properties of Nam Son landfill leachate, COD, NH4+ and pH in particular with the concentration in the range of approximately 6247 ± 295, 1270 ± 38 mg/l and 8 respectively. With the increase in current (1 to 4 A), the COD removal efficiencies increased from approximately 50 to 78 % (pH = 8 and operating time = 40 min)....

    pdf8 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 908 | Lượt tải: 0

  • An investigation of the structural characteristics of modified cellulose from acacia pulp - Doan Minh KhaiAn investigation of the structural characteristics of modified cellulose from acacia pulp - Doan Minh Khai

    The modified acacia celluloses from acacia pulp in Vietnam have some different characteristics from the Canadian softwood cellulose, the Indonesian hardwood cellulose and the initial acacia pulp. As the initial acacia pulp, CND and INDO, the AH-7.5 sample is a cellulose I, and the AH-15 sample is a cellulose II. The cellulose I of modified acaci...

    pdf9 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 972 | Lượt tải: 0

  • A method of real-Time nurbs interpolation with confined chord error for cnc systemsA method of real-Time nurbs interpolation with confined chord error for cnc systems

    In this paper, a real-time interpolation method is presented for parametric NURBS curves. The interpolation algorithm is based on the second order Taylor’s expansion. This method canA method of real-time NURBS interpolation with confined chord error for CNC systems 657 maintain a small feedrate fluctuation, but the chord error can be large at po...

    pdf8 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 796 | Lượt tải: 0

  • A systematic approach to the dilemma between flood vulnerability and resilience - Review and concepts - Hoang Cong TriA systematic approach to the dilemma between flood vulnerability and resilience - Review and concepts - Hoang Cong Tri

    The proposed framework integrates major points of the flipping coin (vulnerability and resilience are normalized as stress and resources, and they are two sides of the same coin) and separation concepts (vulnerability and resilience both can generate positive and/or negative outcomes) to address the dynamic interactions between ecological vulner...

    pdf17 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 898 | Lượt tải: 0

  • Structural and optical properties in near infrared of cdtese coloidal quantum dots for potential application in solar cellsStructural and optical properties in near infrared of cdtese coloidal quantum dots for potential application in solar cells

    By the method of fabricating quantum dots at 260 oC in 10 minutes, alloyed CdTeSe QDs have been formed with good crystallization and zinc-blende single phase. Raman spectra results were completely in sync with XRD, therefore Raman spectra could be used as an effective tool to estimate the Se and Te compositions available in CdTeSe QDs. Studies o...

    pdf11 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 780 | Lượt tải: 0

  • Electrodeposition of hydroxyapatite/functionalized carbon nanotubes (hap/fcnts) coatings on the surface of 316l stainless steelElectrodeposition of hydroxyapatite/functionalized carbon nanotubes (hap/fcnts) coatings on the surface of 316l stainless steel

    Hydroxyapatite/functionalized carbon nanotubes (HAp/fCNTs) coatings were synthesized successfully on the surface of 316L SS substrate by electrodeposition technique. The presence of fCNTs in the HAp/fCNTs nanocomposite decrease the solubility and improve the mechanical properties of the material. In our next studies, we will continue to investig...

    pdf10 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 717 | Lượt tải: 0

  • The transfer matrix method for modal analysis of cracked multistep beam - Vu Thi An NinhThe transfer matrix method for modal analysis of cracked multistep beam - Vu Thi An Ninh

    In the present paper a simplified version of the transfer matrix method has been developed for modal analysis of multiple cracked stepped beam based on an explicit expression of mode shape of multiple cracked uniform beam element. The simplification consists of that the beam state needs to be transferred only through steps of beam but not over t...

    pdf14 trang | Chia sẻ: honghp95 | Ngày: 01/12/2020 | Lượt xem: 1002 | Lượt tải: 0

  • ◄
  • 1
  • ...
  • 1272
  • 1273
  • 1274
  • 1275
  • 1276
  • 1277
  • 1278
  • 1279
  • 1280
  • 1281
  • 1282
  • ...
  • 6880
  • ►

Copyright © 2025 Tai-Lieu.com - Hướng dẫn học sinh giải bài tập trong SGK, Thư viện sáng kiến kinh nghiệm hay, Thư viện đề thi

Chia sẻ: Tai-Lieu.com on Facebook Follow @Tai-Lieu.com